PCE Instruments

Test & Measurement

test-measurement

Air Quality Meters

air-quality-meters

Flow & PH Meters

flow-ph-meters

Other Measuring Tools

other-measuring-tools

Sound & Vibration Meters

sound-vibration-meters

Tachometers

tachometers

Temperature Data Logger

temperature-data-logger

The Contact Thermometer has two measuring inputs. Each measuring input from the Contact Thermometer can be connected to a thermocouple of type K, T and J. 

With the high accuracy and a resolution of 0.01 °C, these rapid temperature fluctuations can also be displayed precisely by the Contact Thermometer.

With a data memory of 20,000 measuring points, the Contact Thermometer can be used for a long period of time. A data point on the Contact Thermometer contains a measured value per channel and date as well as the current time. When the Contact Thermometer is connected to a computer, it is recognized as a removable disk. This allows the Contact Thermometer to be connected to computers with different operating systems, as no additional software is required for further analysis. The measurement data from the Contact Thermometer can be saved as TXT, CSV, XLS and DLG format.

The Contact Thermometer has two measuring inputs. Each measuring input from the Contact Thermometer can be connected to a thermocouple of type K, T and J. With the high accuracy and a resolution of 0.01 °C, these rapid temperature fluctuations can also be displayed precisely by the Contact Thermometer.With a data memory of 20,000 measuring points, the Contact Thermometer can be used for a long period of time. A data point on the Contact Thermometer contains a measured value per channel and date as well as the current time. When the Contact Thermometer is connected to a computer, it is recognized as a removable disk. This allows the Contact Thermometer to be connected to computers with different operating systems, as no additional software is required for further analysis. The measurement data from the Contact Thermometer can be saved as TXT, CSV, XLS and DLG format.<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/kN_B580FZXYG85Q88oPIm5.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure> Key Features :<ul class="md-block-unordered-list-item"><li>Two-channel temperature data logger</li><li>For thermocouples type K, T and J</li><li>Long battery life</li><li>Data storage for 20,000 measuring points</li><li>File format TXT, CSV, XLS and DLG</li><li>Rubberized protective cover</li></ul>Includes :<ul class="md-block-unordered-list-item"><li>1 x Contact Thermometer PCE-T 330</li><li>1 x Thermocouple Type K</li><li>1 x Micro-USB cable</li><li>3 x 1.5 V AAA batteries</li><li>1 x User manual</li></ul>

The Contact Thermometer has two measuring inputs. Each measuring input from the Contact Thermometer can be connected to a thermocouple of type K, T and J.&nbsp;
With the high accuracy and a resolution of 0.01 °C, these rapid temperature fluctuations can also be displayed precisely by the Contact Thermometer.
With a data memory of 20,000 measuring points, the Contact Thermometer can be used for a long period of time. A data point on the Contact Thermometer contains a measured value per channel and date as well as the current time. When the Contact Thermometer is connected to a computer, it is recognized as a removable disk. This allows the Contact Thermometer to be connected to computers with different operating systems, as no additional software is required for further analysis. The measurement data from the Contact Thermometer can be saved as TXT, CSV, XLS and DLG format.

 <div class="img-ctnr">
 <amp-img 
 on="tap:6n3u2"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/kN_B580FZXYG85Q88oPIm5.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="6n3u2" 
 layout="nodisplay"></amp-image-lightbox>

 
 Key Features :
<ul>
<li>Two-channel temperature data logger</li>
<li>For thermocouples type K, T and J</li>
<li>Long battery life</li>
<li>Data storage for 20,000 measuring points</li>
<li>File format TXT, CSV, XLS and DLG</li>
<li>Rubberized protective cover</li>
</ul>
Includes :
<ul>
<li>1 x Contact Thermometer PCE-T 330</li>
<li>1 x Thermocouple Type K</li>
<li>1 x Micro-USB cable</li>
<li>3 x 1.5 V AAA batteries</li>
<li>1 x User manual</li>
</ul>

FLUKE

MEGGER

Onset

TRIPLETT

EXTECH INSTRUMENTS

ACISION

KYORITSU

Center

Tormin

Electrical Power Testing

Multimeters

Humidity & Temperature

Industrial Thermometer

Meteorological Instrumentation & Equipment

Bryan 

buyerIntroduction

PCE-T 330 Dual Channel Temperature Data Logger

pce-t 330 dual channel temperature data logger perekam suhu saluran ganda pce instruments pengecat dwi instruments/四氯乙烯仪器 双通道温度数据记录仪 四氯乙烯仪器

pce-t-330-dual-channel-temperature-data-logger

The sound level calibrator is a battery powered sound source. With the sound calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out. Sound level sensors of 1, ½ and ¼ inch can be connected to the sound calibrator and checked via the adapter attachments. 

The calibration frequency for the sound calibrator is 1000 Hz. This is the reference frequency for the internationally standardized evaluation curves. With this sound calibrator you can calibrate sound measuring devices with weighting filters A, B, C, or D. The calibration pressure for this sound calibrator is 94 ± 0.3 dB (1 Pa) and 114 ± 0.3 dB (10 Pa). Thus, the sound calibrator is used in quality assurance, for example, to test sound level meters or in calibration laboratories.

The sound level calibrator is a battery powered sound source. With the sound calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out. Sound level sensors of 1, ½ and ¼ inch can be connected to the sound calibrator and checked via the adapter attachments. The calibration frequency for the sound calibrator is 1000 Hz. This is the reference frequency for the internationally standardized evaluation curves. With this sound calibrator you can calibrate sound measuring devices with weighting filters A, B, C, or D. The calibration pressure for this sound calibrator is 94 ± 0.3 dB (1 Pa) and 114 ± 0.3 dB (10 Pa). Thus, the sound calibrator is used in quality assurance, for example, to test sound level meters or in calibration laboratories.Key Features : <ul class="md-block-unordered-list-item"><li>Sound pressure level 94 and 114 db</li><li>For weighting filters A, B, C, D</li><li>Ready for immediate use</li><li>Accuracy class 1, IEC 942</li><li>Easy handling</li><li>Adapter for various microphones</li></ul>Includes : <ul class="md-block-unordered-list-item"><li>1 x Sound Level Calibrator PCE-SC 09</li><li>1 x Calibration certificate</li><li>1 x 1/2 inch adapter</li><li>1 x Instrument case</li><li>2 x 1.5V AA batteries</li><li>1 x Quick start guide</li></ul>

The sound level calibrator is a battery powered sound source. With the sound calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out. Sound level sensors of 1, ½ and ¼ inch can be connected to the sound calibrator and checked via the adapter attachments. 
The calibration frequency for the sound calibrator is 1000 Hz. This is the reference frequency for the internationally standardized evaluation curves. With this sound calibrator you can calibrate sound measuring devices with weighting filters A, B, C, or D. The calibration pressure for this sound calibrator is 94 ± 0.3 dB (1 Pa) and 114 ± 0.3 dB (10 Pa). Thus, the sound calibrator is used in quality assurance, for example, to test sound level meters or in calibration laboratories.
Key Features : 
<ul>
<li>Sound pressure level 94 and 114 db</li>
<li>For weighting filters A, B, C, D</li>
<li>Ready for immediate use</li>
<li>Accuracy class 1, IEC 942</li>
<li>Easy handling</li>
<li>Adapter for various microphones</li>
</ul>
Includes : 
<ul>
<li>1 x Sound Level Calibrator PCE-SC 09</li>
<li>1 x Calibration certificate</li>
<li>1 x 1/2 inch adapter</li>
<li>1 x Instrument case</li>
<li>2 x 1.5V AA batteries</li>
<li>1 x Quick start guide</li>
</ul>

PCE-SC 09 Class I Sound Level Calibrator

pce-sc 09 class sound level calibrator kalibrator tingkat suara kelas vibration meters pengukur getaran pce instruments penentukuran aras bunyi meter instruments/四氯乙烯仪器 级声级校准器 声音和振动计 四氯乙烯仪器

pce-sc-09-class-i-sound-level-calibrator

The air quality monitor from PCE Instruments is a true all-rounder when it goes about the quality of the indoor air. The air quality monitor quickly and accurately determines several environmental parameters that are of enormous importance for well-being and concentration. The air quality monitor enables an effective and uncomplicated measurement of CO2, fine dust, temperature, formaldehyde and relative humidity. 

Indication of room temperature and humidity

Particulate matter measurement (PM2.5 / PM10)

Large CO2 measurement range up to 9999 ppm

1 x fine dust measuring device PCE-RCM 12

The air quality monitor from PCE Instruments is a true all-rounder when it goes about the quality of the indoor air. The air quality monitor quickly and accurately determines several environmental parameters that are of enormous importance for well-being and concentration. The air quality monitor enables an effective and uncomplicated measurement of CO2, fine dust, temperature, formaldehyde and relative humidity. Key Features :<ul class="md-block-unordered-list-item"><li>Measurement of CO2 and formaldehyde</li><li>Indication of room temperature and humidity</li><li>Particulate matter measurement (PM2.5 / PM10)</li><li>Large CO2 measurement range up to 9999 ppm</li><li>Changing display of the measured values</li><li>Memory for up to 5000 measuring groups</li><li>Date and time display</li><li>3″ large TFT-LCD display</li><li>Safe and easy handling</li></ul> Includes : <ul class="md-block-unordered-list-item"><li>1 x fine dust measuring device PCE-RCM 12</li><li>1 x USB Cable</li><li>1 x battery</li><li>1 x charging adapter </li><li>1 * Instruction Manual</li></ul>

The air quality monitor from PCE Instruments is a true all-rounder when it goes about the quality of the indoor air. The air quality monitor quickly and accurately determines several environmental parameters that are of enormous importance for well-being and concentration. The air quality monitor enables an effective and uncomplicated measurement of CO2, fine dust, temperature, formaldehyde and relative humidity.&nbsp;
Key Features :
<ul>
<li>Measurement of CO2 and formaldehyde</li>
<li>Indication of room temperature and humidity</li>
<li>Particulate matter measurement (PM2.5 / PM10)</li>
<li>Large CO2 measurement range up to 9999 ppm</li>
<li>Changing display of the measured values</li>
<li>Memory for up to 5000 measuring groups</li>
<li>Date and time display</li>
<li>3″ large TFT-LCD display</li>
<li>Safe and easy handling</li>
</ul>
 Includes : 
<ul>
<li>1 x fine dust measuring device PCE-RCM 12</li>
<li>1 x USB Cable</li>
<li>1 x battery</li>
<li>1 x charging adapter </li>
<li>1 * Instruction Manual</li>
</ul>

PCE-RCM 12 Air Quality Monitor With Particle Measurement and Hcho

pce-rcm 12 air quality monitor particle measurement hcho kualitas udara dengan pengukuran partikel dan meters pengukur pce instruments kualiti zarah meter instruments/四氯乙烯仪器 空气质量监测仪，带颗粒测量和 空气质量计 四氯乙烯仪器

pce-rcm-12-air-quality-monitor-with-particle-measurement-and-hcho

Alkalinity, Chlorine, Cyanuric acid, pH, Total & Calcium hardness, Active oxygen, Chlorine dioxide,  Bromine, Ozone, Hydrogen peroxide, PHMB (polyhexanide), Urea Tester

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter pH meter, a water sample of 10 ml must be placed in a cuvette. The LED built into the multi-parameter pH meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. 

Each measurement is automatically saved by the multi-parameter pH meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter pH meter. A free app is available to analyze the measured values ​​from the multi-parameter pH meter. It is also possible to establish a Bluetooth connection between the multi-parameter pH meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter pH meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter pH meter is also free of charge.

Exchangeable and lockable cuvette 503 nm / 570 nm / 620 nm LED

Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)

1 x Multi-parameter pH Meter PCE-CP 30 incl. Cuvette

1 x Reagent starter kit (20x pH, 20x free chlorine, 10 x combined / total chlorine, 10x alkalinity, 10 x cyanuric acid)

Alkalinity, Chlorine, Cyanuric acid, pH, Total &amp; Calcium hardness, Active oxygen, Chlorine dioxide,  Bromine, Ozone, Hydrogen peroxide, PHMB (polyhexanide), Urea TesterThe multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter pH meter, a water sample of 10 ml must be placed in a cuvette. The LED built into the multi-parameter pH meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. Each measurement is automatically saved by the multi-parameter pH meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter pH meter. A free app is available to analyze the measured values ​​from the multi-parameter pH meter. It is also possible to establish a Bluetooth connection between the multi-parameter pH meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter pH meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter pH meter is also free of charge. Key Features : <ul class="md-block-unordered-list-item"><li>Adjustable units: mg / l, ppm</li><li>Up to 13 selectable parameters</li><li>Bluetooth connection with app</li><li>Exchangeable and lockable cuvette 503 nm / 570 nm / 620 nm LED</li><li>Automatic shutdown when inactive</li><li>Many different menu languages</li><li>Light detector: photodiode</li><li>Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)</li></ul>Includes : <ul class="md-block-unordered-list-item"><li>1 x Multi-parameter pH Meter PCE-CP 30 incl. Cuvette</li><li>1 x Replacement cuvette</li><li>1 x Light protection cover</li><li>1 x Microfiber cloth</li><li>1 x Plunger</li><li>1 x 10 ml dosing pipette</li><li>4 x AA batteries</li><li>1 x Quick start guide</li><li>1 x Service bag</li><li>1 x Free app</li><li>1 x Free PC software</li><li>1 x Reagent starter kit (20x pH, 20x free chlorine, 10 x combined / total chlorine, 10x alkalinity, 10 x cyanuric acid)</li></ul>

Alkalinity, Chlorine, Cyanuric acid, pH, Total &amp; Calcium hardness, Active oxygen, Chlorine dioxide,  Bromine, Ozone, Hydrogen peroxide, PHMB (polyhexanide), Urea Tester
The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter pH meter, a water sample of 10 ml must be placed in a cuvette. The LED built into the multi-parameter pH meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. 
Each measurement is automatically saved by the multi-parameter pH meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter pH meter. A free app is available to analyze the measured values ​​from the multi-parameter pH meter. It is also possible to establish a Bluetooth connection between the multi-parameter pH meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter pH meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter pH meter is also free of charge.
 Key Features : 
<ul>
<li>Adjustable units: mg / l, ppm</li>
<li>Up to 13 selectable parameters</li>
<li>Bluetooth connection with app</li>
<li>Exchangeable and lockable cuvette 503 nm / 570 nm / 620 nm LED</li>
<li>Automatic shutdown when inactive</li>
<li>Many different menu languages</li>
<li>Light detector: photodiode</li>
<li>Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)</li>
</ul>
Includes : 
<ul>
<li>1 x Multi-parameter pH Meter PCE-CP 30 incl. Cuvette</li>
<li>1 x Replacement cuvette</li>
<li>1 x Light protection cover</li>
<li>1 x Microfiber cloth</li>
<li>1 x Plunger</li>
<li>1 x 10 ml dosing pipette</li>
<li>4 x AA batteries</li>
<li>1 x Quick start guide</li>
<li>1 x Service bag</li>
<li>1 x Free app</li>
<li>1 x Free PC software</li>
<li>1 x Reagent starter kit (20x pH, 20x free chlorine, 10 x combined / total chlorine, 10x alkalinity, 10 x cyanuric acid)</li>
</ul>

PCE-CP 30 Multi Parameter

pce-cp 30 multi parameter multiparameter flow ph meters pengukur aliran pce instruments berbilang meter instruments/四氯乙烯仪器 多参数 流量和ph计 四氯乙烯仪器

pce-cp-30-multi-parameter

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter pH meter. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter pH meter, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter pH meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample.  

Each measurement is automatically saved by the multi-parameter pH meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter pH meter. A free app is available to analyze the measured values ​​from the multi-parameter pH meter. It is also possible to establish a Bluetooth connection between the multi-parameter pH meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter pH meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter pH meter is also free of charge. 

Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)

1 x Multi-parameter pH meter PCE-CP 04 incl. cuvette

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter pH meter. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter pH meter, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter pH meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample.  Each measurement is automatically saved by the multi-parameter pH meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter pH meter. A free app is available to analyze the measured values ​​from the multi-parameter pH meter. It is also possible to establish a Bluetooth connection between the multi-parameter pH meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter pH meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter pH meter is also free of charge. Key Features : <ul class="md-block-unordered-list-item"><li>Up to 5 selectable parameters</li><li>Bluetooth connection with app</li><li>Exchangeable and lockable cuvette</li><li>503 nm / 570 nm / 620 nm LED</li><li>Automatic shutdown when inactive</li><li>Many different menu languages</li><li>Light detector: photodiode</li><li>Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)</li></ul>Includes : <ul class="md-block-unordered-list-item"><li>1 x Multi-parameter pH meter PCE-CP 04 incl. cuvette</li><li>1 x Replacement cuvette</li><li>1 x Light protection cover</li><li>1 x Microfiber cloth</li><li>1 x Plunger</li><li>1 x 10 ml dosing pipette</li><li>4 x AA batteries</li><li>1 x Quick start guide</li><li>1 x Service bag</li><li>1 x Free app</li><li>1 x Free PC software</li></ul>

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter pH meter. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter pH meter, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter pH meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. &nbsp;
Each measurement is automatically saved by the multi-parameter pH meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter pH meter. A free app is available to analyze the measured values ​​from the multi-parameter pH meter. It is also possible to establish a Bluetooth connection between the multi-parameter pH meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter pH meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter pH meter is also free of charge.&nbsp;
Key Features : 
<ul>
<li>Up to 5 selectable parameters</li>
<li>Bluetooth connection with app</li>
<li>Exchangeable and lockable cuvette</li>
<li>503 nm / 570 nm / 620 nm LED</li>
<li>Automatic shutdown when inactive</li>
<li>Many different menu languages</li>
<li>Light detector: photodiode</li>
<li>Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)</li>
</ul>
Includes : 
<ul>
<li>1 x Multi-parameter pH meter PCE-CP 04 incl. cuvette</li>
<li>1 x Replacement cuvette</li>
<li>1 x Light protection cover</li>
<li>1 x Microfiber cloth</li>
<li>1 x Plunger</li>
<li>1 x 10 ml dosing pipette</li>
<li>4 x AA batteries</li>
<li>1 x Quick start guide</li>
<li>1 x Service bag</li>
<li>1 x Free app</li>
<li>1 x Free PC software</li>
</ul>

PCE-CP 04 Multi Parameter – Ph, Alkalinity, Calcium Hardness, Total Hardness Tester

pce-cp 04 multi parameter ph, alkalinity, calcium hardness, total hardness tester alkalinitas, kekerasan kalsium, penguji measuring tools alat ukur lainnya pce instruments kealkalian, jumlah pengukur lain instruments/四氯乙烯仪器 多参数-ph、碱度、钙硬度、总硬度测试仪 其他量具用品 四氯乙烯仪器

pce-cp-04-multi-parameter-ph-alkalinity-calcium-hardness-total-hardness-tester

The multi-parameter photometer is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. 

Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)

1 x Multi-parameter pH meter PCE-CP 11 incl. cuvette

The multi-parameter photometer is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. Key Features : <ul class="md-block-unordered-list-item"><li>Up to 7 selectable parameters</li><li>Bluetooth connection with app</li><li>Exchangeable and lockable cuvette 503 nm / 570 nm / 620 nm LED</li><li>Automatic shutdown when inactive</li><li>Many different menu languages</li><li>Light detector: photodiode</li><li>Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)</li></ul>Includes : <ul class="md-block-unordered-list-item"><li>1 x Multi-parameter pH meter PCE-CP 11 incl. cuvette</li><li>1 x Replacement cuvette</li><li>1 x Light protection cover</li><li>1 x Microfiber cloth</li><li>1 x Plunger</li><li>1 x 10 ml dosing pipette</li><li>4 x AA batteries</li><li>1 x Quick start guide</li><li>1 x Service bag</li><li>1 x Free app</li><li>1 x Free PC software</li><li>1 x Free cloud service</li></ul>

The multi-parameter photometer is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample.&nbsp;
 Key Features : 
<ul>
<li>Up to 7 selectable parameters</li>
<li>Bluetooth connection with app</li>
<li>Exchangeable and lockable cuvette 503 nm / 570 nm / 620 nm LED</li>
<li>Automatic shutdown when inactive</li>
<li>Many different menu languages</li>
<li>Light detector: photodiode</li>
<li>Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)</li>
</ul>
Includes : 
<ul>
<li>1 x Multi-parameter pH meter PCE-CP 11 incl. cuvette</li>
<li>1 x Replacement cuvette</li>
<li>1 x Light protection cover</li>
<li>1 x Microfiber cloth</li>
<li>1 x Plunger</li>
<li>1 x 10 ml dosing pipette</li>
<li>4 x AA batteries</li>
<li>1 x Quick start guide</li>
<li>1 x Service bag</li>
<li>1 x Free app</li>
<li>1 x Free PC software</li>
<li>1 x Free cloud service</li>
</ul>

PCE-CP 11 Multi Parameter Ph, Chlorine, Total Hardness, Iron Tester

pce-cp 11 multi parameter ph, chlorine, total hardness, iron tester klorin, kekerasan total, penguji besi flow ph meters pengukur aliran pce instruments pelbagai jumlah, meter instruments/四氯乙烯仪器 多参数ph、氯、总硬度、铁测试仪 流量和ph计 四氯乙烯仪器

pce-cp-11-multi-parameter-ph-chlorine-total-hardness-iron-tester

PCE-DT 65 is a digital handheld tachometer, or rotation meter, that can take both contact and non-contact measurements of rotation speed and linear speed. 

This handheld tachometer features an integrated laser and includes a mechanical attachment with contact probes, making it the ideal measuring instrument for machines, motors, conveyor belts and other moving parts.

Non-contact measurements are taken with the help of laser-reflective tape that is fixed on the moving part. 3 x strips of reflective tape (each 20 mm or 0.8 in) are included in the delivery contents.

3 x Strips of reflective tape (each 20 mm or 0.8 in)

PCE-DT 65 is a digital handheld tachometer, or rotation meter, that can take both contact and non-contact measurements of rotation speed and linear speed. This handheld tachometer features an integrated laser and includes a mechanical attachment with contact probes, making it the ideal measuring instrument for machines, motors, conveyor belts and other moving parts.Non-contact measurements are taken with the help of laser-reflective tape that is fixed on the moving part. 3 x strips of reflective tape (each 20 mm or 0.8 in) are included in the delivery contents.<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/iSyPh3VDpKQaB3DjG4Bp_C.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure> Key Features : <ul class="md-block-unordered-list-item"><li>Speed measurement: rpm</li><li>Surface velocity: m/min</li><li>Number of rotations: counter</li><li>Frequency: m, in, ft, yd</li><li>Linear measurement: m, in, ft, yd</li></ul>Includes : <ul class="md-block-unordered-list-item"><li>1 x PCE-DT 65 Handheld tachometer</li><li>1 x Mechanical attachment</li><li>1 x Adapter wheel</li><li>1 x Measuring probe (outer cone)</li><li>1 x Measuring hollow point (inside cone)</li><li>1 x Belt bag</li><li>1 x Battery</li><li>3 x Strips of reflective tape (each 20 mm or 0.8 in)</li><li>1 x User manual</li></ul>

PCE-DT 65 is a digital handheld tachometer, or rotation meter, that can take both contact and non-contact measurements of rotation speed and linear speed.&nbsp;
This handheld tachometer features an integrated laser and includes a mechanical attachment with contact probes, making it the ideal measuring instrument for machines, motors, conveyor belts and other moving parts.
Non-contact measurements are taken with the help of laser-reflective tape that is fixed on the moving part. 3 x strips of reflective tape (each 20 mm or 0.8 in) are included in the delivery contents.

 <div class="img-ctnr">
 <amp-img 
 on="tap:5qiu3"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/iSyPh3VDpKQaB3DjG4Bp_C.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5qiu3" 
 layout="nodisplay"></amp-image-lightbox>

 
&nbsp;Key Features : 
<ul>
<li>Speed measurement: rpm</li>
<li>Surface velocity: m/min</li>
<li>Number of rotations: counter</li>
<li>Frequency: m, in, ft, yd</li>
<li>Linear measurement: m, in, ft, yd</li>
</ul>
Includes : 
<ul>
<li>1 x PCE-DT 65 Handheld tachometer</li>
<li>1 x Mechanical attachment</li>
<li>1 x Adapter wheel</li>
<li>1 x Measuring probe (outer cone)</li>
<li>1 x Measuring hollow point (inside cone)</li>
<li>1 x Belt bag</li>
<li>1 x Battery</li>
<li>3 x Strips of reflective tape (each 20 mm or 0.8 in)</li>
<li>1 x User manual</li>
</ul>

PCE-DT 65 Contact/Non-Contact Digital Handheld Tachometer

pce-dt 65 contact/non-contact digital handheld tachometer takometer genggam kontak/non-kontak tachometers pce instruments pegang tangan sentuhan/bukan kenalan instruments/四氯乙烯仪器 接触式/非接触式数字手持式转速表 四氯乙烯仪器

pce-dt-65-contact-non-contact-digital-handheld-tachometer

For medium sized pipes with dia DN 50- 700 / 57 - 720 mm

The ultrasonic flowmeter has a measuring range of ±32 m/s. With an accuracy of ±1.5 % f.s. for a pipe diameter of DN ≥50, ±3.5 % f.s. for a pipe diameter of DN <50 and a reproducibility of ±0.5 % f.s., the Portable Ultrasonic Flow Meter is a particularly precise measuring device. An installation aid is available for installing the sensors of the Portable Ultrasonic Flow Meter. The installation aid graphically displays the signal quality of the Portable Ultrasonic Flow Meter. In addition, it is graphically displayed whether the sensors of the Portable Ultrasonic Flow Meter are positioned at the correct distance from each other. To carry out flow measurements with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications. The Portable Ultrasonic Flow Meter displays the measured values in a wide range of units. For example: m³, l, gal, igl, mgl, cf, bal, ib and ob.

Optional software for analysing the measured values

Reproducibility ±0.5 % of measured value

Data memory for 10 million measuring points

optionally with ISO or DAkkS calibration certificate

1 x Portable Portable Ultrasonic Flow Meter PCE-TDS 200+

1 x Flow sensor PCE-TDS 200 M SENSOR (pair)

For medium sized pipes with dia DN 50- 700 / 57 - 720 mmThe ultrasonic flowmeter has a measuring range of ±32 m/s. With an accuracy of ±1.5 % f.s. for a pipe diameter of DN ≥50, ±3.5 % f.s. for a pipe diameter of DN &lt;50 and a reproducibility of ±0.5 % f.s., the Portable Ultrasonic Flow Meter is a particularly precise measuring device. An installation aid is available for installing the sensors of the Portable Ultrasonic Flow Meter. The installation aid graphically displays the signal quality of the Portable Ultrasonic Flow Meter. In addition, it is graphically displayed whether the sensors of the Portable Ultrasonic Flow Meter are positioned at the correct distance from each other. To carry out flow measurements with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications. The Portable Ultrasonic Flow Meter displays the measured values in a wide range of units. For example: m³, l, gal, igl, mgl, cf, bal, ib and ob.Key Features : <ul class="md-block-unordered-list-item"><li>Measuring range ±32 m/s</li><li>USB-C interface for data transfer</li><li>Optional software for analysing the measured values</li><li>Reproducibility ±0.5 % of measured value</li><li>Heat quantity measurement</li><li>Data memory for 10 million measuring points</li><li>Individually adjustable alarm limits</li><li>optionally with ISO or DAkkS calibration certificate</li></ul>Includes :<ul class="md-block-unordered-list-item"><li>1 x Portable Portable Ultrasonic Flow Meter PCE-TDS 200+</li><li>2 x Temperature sensor TF-RA330</li><li>1 x Flow sensor PCE-TDS 200 M SENSOR (pair)</li><li>2 x 5 m connection cable</li><li>2 x detachable cable ties</li><li>1 x power supply unit</li><li>1 x USB-C cable</li><li>1 x ultrasonic contact gel</li><li>1 x PCE measuring tape</li><li>1 x plastic case</li><li>1 x instruction manual</li></ul>

For medium sized pipes with dia DN 50- 700 / 57 - 720 mm
The ultrasonic flowmeter has a measuring range of ±32 m/s. With an accuracy of ±1.5 % f.s. for a pipe diameter of DN ≥50, ±3.5 % f.s. for a pipe diameter of DN &lt;50 and a reproducibility of ±0.5 % f.s., the Portable Ultrasonic Flow Meter is a particularly precise measuring device. An installation aid is available for installing the sensors of the Portable Ultrasonic Flow Meter. The installation aid graphically displays the signal quality of the Portable Ultrasonic Flow Meter. In addition, it is graphically displayed whether the sensors of the Portable Ultrasonic Flow Meter are positioned at the correct distance from each other. To carry out flow measurements with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications. The Portable Ultrasonic Flow Meter displays the measured values in a wide range of units. For example: m³, l, gal, igl, mgl, cf, bal, ib and ob.
Key Features : 
<ul>
<li>Measuring range ±32 m/s</li>
<li>USB-C interface for data transfer</li>
<li>Optional software for analysing the measured values</li>
<li>Reproducibility ±0.5 % of measured value</li>
<li>Heat quantity measurement</li>
<li>Data memory for 10 million measuring points</li>
<li>Individually adjustable alarm limits</li>
<li>optionally with ISO or DAkkS calibration certificate</li>
</ul>
Includes :
<ul>
<li>1 x Portable Portable Ultrasonic Flow Meter PCE-TDS 200+</li>
<li>2 x Temperature sensor TF-RA330</li>
<li>1 x Flow sensor PCE-TDS 200 M SENSOR (pair)</li>
<li>2 x 5 m connection cable</li>
<li>2 x detachable cable ties</li>
<li>1 x power supply unit</li>
<li>1 x USB-C cable</li>
<li>1 x ultrasonic contact gel</li>
<li>1 x PCE measuring tape</li>
<li>1 x plastic case</li>
<li>1 x instruction manual</li>
</ul>

PCE-TDS 200+ M Portable Ultrasonic Flow Meter With Temperature

pce-tds 200+ portable ultrasonic flow meter temperature pengukur aliran ultrasonik portabel dengan suhu ph meters pce instruments mudah alih instruments/四氯乙烯仪器 便携式带温度超声波流量计 流量和ph计 四氯乙烯仪器

pce-tds-200-m-portable-ultrasonic-flow-meter-with-temperature

The PCE-CT 27FN coating thickness gauge is designed to determine coating thicknesses. The layer thickness measurement with the layer thickness gauge is carried out on metallic substrates. The coating thickness gauge measures both ferrous and non-ferrous metals. In this way, lacquers, paints, plastics and similar materials can be checked. The coating thickness gauge is primarily used for control measurements on workpieces.

Precisely due to the fact that the coating thickness gauge measures non-destructively, it is often used in the areas of application mentioned. The reason for this is that the test pieces can still be used later. In addition to quality control, the coating thickness gauge can also be used for incoming goods inspection.

The coating thickness gauge is designed for measuring non-magnetic coatings such as paint, plastic, chrome, copper, zinc, enamel, etc. on steel and iron. It is also suitable for measuring all insulating layers such as paint, plastic, enamel, paper, glass, rubber, etc. on copper, aluminium, brass and stainless steel as well as anodised aluminum.

measuring head for precise measuring results

1 x PCE-CT 27FN coating thickness gauge 

1 x set of calibration standards (Fe and NFe)

The PCE-CT 27FN coating thickness gauge is designed to determine coating thicknesses. The layer thickness measurement with the layer thickness gauge is carried out on metallic substrates. The coating thickness gauge measures both ferrous and non-ferrous metals. In this way, lacquers, paints, plastics and similar materials can be checked. The coating thickness gauge is primarily used for control measurements on workpieces.Precisely due to the fact that the coating thickness gauge measures non-destructively, it is often used in the areas of application mentioned. The reason for this is that the test pieces can still be used later. In addition to quality control, the coating thickness gauge can also be used for incoming goods inspection.The coating thickness gauge is designed for measuring non-magnetic coatings such as paint, plastic, chrome, copper, zinc, enamel, etc. on steel and iron. It is also suitable for measuring all insulating layers such as paint, plastic, enamel, paper, glass, rubber, etc. on copper, aluminium, brass and stainless steel as well as anodised aluminum.Key Features :<ul class="md-block-unordered-list-item"><li>F / N: also for non-ferrous metals </li><li>immediately ready to measure</li><li>large measuring range</li><li>measuring head for precise measuring results</li><li>practical V-groove on the measuring head</li><li>external measuring probe</li><li>measuring range: 0 ... 1250 µm</li><li>with calibration standards </li></ul>Includes : <ul class="md-block-unordered-list-item"><li>1 x PCE-CT 27FN coating thickness gauge </li><li>1 x measuring probe</li><li>1 x carrying case</li><li>2 x batteries</li><li>1 x set of plastic plates</li><li>1 x set of calibration standards (Fe and NFe)</li><li>1 x operating instructions  </li></ul>

The PCE-CT 27FN coating thickness gauge is designed to determine coating thicknesses. The layer thickness measurement with the layer thickness gauge is carried out on metallic substrates. The coating thickness gauge measures both ferrous and non-ferrous metals. In this way, lacquers, paints, plastics and similar materials can be checked. The coating thickness gauge is primarily used for control measurements on workpieces.
Precisely due to the fact that the coating thickness gauge measures non-destructively, it is often used in the areas of application mentioned. The reason for this is that the test pieces can still be used later. In addition to quality control, the coating thickness gauge can also be used for incoming goods inspection.
The coating thickness gauge is designed for measuring non-magnetic coatings such as paint, plastic, chrome, copper, zinc, enamel, etc. on steel and iron. It is also suitable for measuring all insulating layers such as paint, plastic, enamel, paper, glass, rubber, etc. on copper, aluminium, brass and stainless steel as well as anodised aluminum.
Key Features :
<ul>
<li>F / N: also for non-ferrous metals </li>
<li>immediately ready to measure</li>
<li>large measuring range</li>
<li>measuring head for precise measuring results</li>
<li>practical V-groove on the measuring head</li>
<li>external measuring probe</li>
<li>measuring range: 0 ... 1250 µm</li>
<li>with calibration standards&nbsp;</li>
</ul>
Includes : 
<ul>
<li>1 x PCE-CT 27FN coating thickness gauge </li>
<li>1 x measuring probe</li>
<li>1 x carrying case</li>
<li>2 x batteries</li>
<li>1 x set of plastic plates</li>
<li>1 x set of calibration standards (Fe and NFe)</li>
<li>1 x operating instructions &nbsp;</li>
</ul>

PCE-CT 27FN Coating Thickness Gauge With External Probe

pce-ct 27fn coating thickness gauge external probe pengukur ketebalan lapisan dengan eksternal measuring tools alat ukur lainnya pce instruments tolok salutan luaran lain instruments/四氯乙烯仪器 带外部探头的涂层测厚仪 其他量具用品 四氯乙烯仪器

pce-ct-27fn-coating-thickness-gauge-with-external-probe

Alkalinity, Free & Total Chlorine, Cyanuric acid, pH, Total hardness, Calcium hardness Meter

The multi-parameter photometer is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. 

Each measurement is automatically saved by the multi-parameter photometer. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter photometer. A free app is available to analyze the measured values ​​from the multi-parameter photometer. It is also possible to establish a Bluetooth connection between the multi-parameter photometer and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter photometer, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter photometer is also free of charge.

1 x Multi-parameter photometer PCE-CP 20 incl. Cuvette

Alkalinity, Free &amp; Total Chlorine, Cyanuric acid, pH, Total hardness, Calcium hardness MeterThe multi-parameter photometer is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. Each measurement is automatically saved by the multi-parameter photometer. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter photometer. A free app is available to analyze the measured values ​​from the multi-parameter photometer. It is also possible to establish a Bluetooth connection between the multi-parameter photometer and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter photometer, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter photometer is also free of charge. Key Features : <ul class="md-block-unordered-list-item"><li>Up to 7 selectable parameters</li><li>Bluetooth connection with app</li><li>Exchangeable and lockable cuvette</li><li>503 nm / 570 nm / 620 nm LED</li><li>Automatic shutdown when inactive</li><li>Many different menu languages</li><li>Light detector: photodiode</li><li>Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)</li></ul>Includes : <ul class="md-block-unordered-list-item"><li>1 x Multi-parameter photometer PCE-CP 20 incl. Cuvette</li><li>1 x Replacement cuvette</li><li>1 x Light protection cover</li><li>1 x Microfiber cloth</li><li>1 x Plunger</li><li>1 x 10 ml dosing pipette</li><li>4 x AA batteries</li><li>1 x Quick start guide</li><li>1 x Service bag</li><li>1 x Free app</li><li>1 x Free PC software</li><li>1 x Free cloud service</li><li>1 x Reagent starter kit (20x pH, 20x free chlorine, 10 x combined / total chlorine, 10x alkalinity, 10 x cyanuric acid)</li></ul>

Alkalinity, Free &amp; Total Chlorine, Cyanuric acid, pH, Total hardness, Calcium hardness Meter
The multi-parameter photometer is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. 
Each measurement is automatically saved by the multi-parameter photometer. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter photometer. A free app is available to analyze the measured values ​​from the multi-parameter photometer. It is also possible to establish a Bluetooth connection between the multi-parameter photometer and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter photometer, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter photometer is also free of charge.
 Key Features : 
<ul>
<li>Up to 7 selectable parameters</li>
<li>Bluetooth connection with app</li>
<li>Exchangeable and lockable cuvette</li>
<li>503 nm / 570 nm / 620 nm LED</li>
<li>Automatic shutdown when inactive</li>
<li>Many different menu languages</li>
<li>Light detector: photodiode</li>
<li>Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)</li>
</ul>
Includes : 
<ul>
<li>1 x Multi-parameter photometer PCE-CP 20 incl. Cuvette</li>
<li>1 x Replacement cuvette</li>
<li>1 x Light protection cover</li>
<li>1 x Microfiber cloth</li>
<li>1 x Plunger</li>
<li>1 x 10 ml dosing pipette</li>
<li>4 x AA batteries</li>
<li>1 x Quick start guide</li>
<li>1 x Service bag</li>
<li>1 x Free app</li>
<li>1 x Free PC software</li>
<li>1 x Free cloud service</li>
<li>1 x Reagent starter kit (20x pH, 20x free chlorine, 10 x combined / total chlorine, 10x alkalinity, 10 x cyanuric acid)</li>
</ul>