MR. COOL Pre-Mixed Coolant
- Provides protection and longer engine life.
- Formulated with monoethylene glycol combined with special inhibitor additive technology for extended protection compared to conventional coolants.
- Protects aluminum and all metal parts in the cooling system against rust and corrosion.
- Suitable for European, Japanese, Asian, and USA vehicle cooling systems.
Recommended Service Interval
- Replace MR. COOL Pre-Mixed Coolant every 30,000 km.
Directions for Use
- Drain and flush the cooling system.
- Check all joints and hose clips.
- Pour the content into the radiator.
- Run the engine with the pre-mixed coolant and recheck the coolant level.
- If overheating persists, consult a professional installer.
- Wipe off any spillage immediately to prevent paintwork stains.
- Use extreme care when removing the radiator or overflow cap — hot liquid or steam may cause burns.
- Refer to the owner’s manual for proper cap removal instructions.
- Keep out of reach of children.
- Avoid skin and eye contact.
- If swallowed: drink water or milk and seek medical advice.
- If contact occurs: rinse thoroughly with water.