Circuit Breakers

circuit-breakers

Molded Case Circuit Breakers - MCCBs

molded-case-circuit-breakers-mccbs

 The EPS HM1 Series MCCBs are designed and fully type tested by Interlek SEMKO in compliance to IEC 60947-2 international standards. The complete range of this HM1 series MCCBs offers total protection against overcurrent and sort circuits at most common fault levels. The various interrupting capacities available under this series are most suitable for all installation ranging from Main Switchboard, Sub Boards to Distribution Boards.  

The casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation & protection.MechanismThe EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.

Standard features include a trip button and an automatic tripping device. In keeping up with the latest electrical designs and building automation, the HM1 series can be fitted with the following accessories.

Rated Operational Voltage (Ue) (V) AC: 415

Rated Insulational Voltage (Ui) (V) AC: 660

<h3 class="md-block-header-three">Eps HM1-100C 3Pole 25KA Mccb 100A</h3> The EPS HM1 Series MCCBs are designed and fully type tested by Interlek SEMKO in compliance to IEC 60947-2 international standards. The complete range of this HM1 series MCCBs offers total protection against overcurrent and sort circuits at most common fault levels. The various interrupting capacities available under this series are most suitable for all installation ranging from Main Switchboard, Sub Boards to Distribution Boards. Product FeaturesMaterialThe casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation &amp; protection.MechanismThe EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.AccessoriesStandard features include a trip button and an automatic tripping device. In keeping up with the latest electrical designs and building automation, the HM1 series can be fitted with the following accessories.Electrical Features<ul class="md-block-unordered-list-item"><li>Frame Size: 100AF</li><li>Ampere Rating (A): 100 A</li><li>Number of Poles (P): 3</li><li>Rated Operational Voltage (Ue) (V) AC: 415</li><li>Rated Insulational Voltage (Ui) (V) AC: 660</li><li>Frequency: 50 / 60Hz</li><li>Utilization Category: A</li><li>Standard Compliance: IEC 60947-2</li></ul>

<h3>Eps HM1-100C 3Pole 25KA Mccb 100A</h3>
&nbsp;The EPS HM1 Series MCCBs are designed and fully type tested by Interlek SEMKO in compliance to IEC 60947-2 international standards. The complete range of this HM1 series MCCBs offers total protection against overcurrent and sort circuits at most common fault levels. The various interrupting capacities available under this series are most suitable for all installation ranging from Main Switchboard, Sub Boards to Distribution Boards.&nbsp;&nbsp;
Product Features
Material
The casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation &amp; protection.MechanismThe EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.
Accessories
Standard features include a trip button and an automatic tripping device. In keeping up with the latest electrical designs and building automation, the HM1 series can be fitted with the following accessories.
Electrical Features
<ul>
<li>Frame Size: 100AF</li>
<li>Ampere Rating (A): 100 A</li>
<li>Number of Poles (P): 3</li>
<li>Rated Operational Voltage (Ue) (V) AC: 415</li>
<li>Rated Insulational Voltage (Ui) (V) AC: 660</li>
<li>Frequency: 50 / 60Hz</li>
<li>Utilization Category: A</li>
<li>Standard Compliance: IEC 60947-2</li>
</ul>

Ms. Lim

Eps HM1-100C 3Pole 25KA Mccb 100A

eps hm1-100c 3pole 25ka mccb 100a molded case circuit breakers mccbs 3tiang eps/每股收益 3极25ka 每股收益

eps-hm1-100c-3pole-25ka-mccb-100a

The casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation & protection.

The EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.

<h3 class="md-block-header-three">Eps HM1-100C 3Pole 25KA Mccb 63A</h3> The EPS HM1 Series MCCBs are designed and fully type tested by Interlek SEMKO in compliance to IEC 60947-2 international standards. The complete range of this HM1 series MCCBs offers total protection against overcurrent and sort circuits at most common fault levels. The various interrupting capacities available under this series are most suitable for all installation ranging from Main Switchboard, Sub Boards to Distribution Boards. Product FeaturesMaterialThe casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation &amp; protection.MechanismThe EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.AccessoriesStandard features include a trip button and an automatic tripping device. In keeping up with the latest electrical designs and building automation, the HM1 series can be fitted with the following accessories.Electrical Features<ul class="md-block-unordered-list-item"><li>Frame Size: 100AF</li><li>Ampere Rating (A): 63 A</li><li>Number of Poles (P): 3</li><li>Rated Operational Voltage (Ue) (V) AC: 415</li><li>Rated Insulational Voltage (Ui) (V) AC: 660</li><li>Frequency: 50 / 60Hz</li><li>Utilization Category: A</li><li>Standard Compliance: IEC 60947-2</li></ul>

<h3>Eps HM1-100C 3Pole 25KA Mccb 63A</h3>
&nbsp;The EPS HM1 Series MCCBs are designed and fully type tested by Interlek SEMKO in compliance to IEC 60947-2 international standards. The complete range of this HM1 series MCCBs offers total protection against overcurrent and sort circuits at most common fault levels. The various interrupting capacities available under this series are most suitable for all installation ranging from Main Switchboard, Sub Boards to Distribution Boards.&nbsp;&nbsp;
Product Features
Material
The casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation &amp; protection.
Mechanism
The EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.
Accessories
Standard features include a trip button and an automatic tripping device. In keeping up with the latest electrical designs and building automation, the HM1 series can be fitted with the following accessories.
Electrical Features
<ul>
<li>Frame Size: 100AF</li>
<li>Ampere Rating (A): 63 A</li>
<li>Number of Poles (P): 3</li>
<li>Rated Operational Voltage (Ue) (V) AC: 415</li>
<li>Rated Insulational Voltage (Ui) (V) AC: 660</li>
<li>Frequency: 50 / 60Hz</li>
<li>Utilization Category: A</li>
<li>Standard Compliance: IEC 60947-2</li>
</ul>

Eps HM1-100C 3Pole 25KA Mccb 63A

eps hm1-100c 3pole 25ka mccb 63a molded case circuit breakers mccbs 3tiang eps/每股收益 3极25ka 每股收益

eps-hm1-100c-3pole-25ka-mccb-63a

<h3 class="md-block-header-three">Eps HM1-100C 3Pole 25KA Mccb 40A</h3> The EPS HM1 Series MCCBs are designed and fully type tested by Interlek SEMKO in compliance to IEC 60947-2 international standards. The complete range of this HM1 series MCCBs offers total protection against overcurrent and sort circuits at most common fault levels. The various interrupting capacities available under this series are most suitable for all installation ranging from Main Switchboard, Sub Boards to Distribution Boards. Product FeaturesMaterialThe casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation &amp; protection.MechanismThe EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.AccessoriesStandard features include a trip button and an automatic tripping device. In keeping up with the latest electrical designs and building automation, the HM1 series can be fitted with the following accessories.Electrical Features<ul class="md-block-unordered-list-item"><li>Frame Size: 100AF</li><li>Ampere Rating (A): 40 A</li><li>Number of Poles (P): 3</li><li>Rated Operational Voltage (Ue) (V) AC: 415</li><li>Rated Insulational Voltage (Ui) (V) AC: 660</li><li>Frequency: 50 / 60Hz</li><li>Utilization Category: A</li><li>Standard Compliance: IEC 60947-2</li></ul>

<h3>Eps HM1-100C 3Pole 25KA Mccb 40A</h3>
&nbsp;The EPS HM1 Series MCCBs are designed and fully type tested by Interlek SEMKO in compliance to IEC 60947-2 international standards. The complete range of this HM1 series MCCBs offers total protection against overcurrent and sort circuits at most common fault levels. The various interrupting capacities available under this series are most suitable for all installation ranging from Main Switchboard, Sub Boards to Distribution Boards.&nbsp;&nbsp;
Product Features
Material
The casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation &amp; protection.
Mechanism
The EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.
Accessories
Standard features include a trip button and an automatic tripping device. In keeping up with the latest electrical designs and building automation, the HM1 series can be fitted with the following accessories.
Electrical Features
<ul>
<li>Frame Size: 100AF</li>
<li>Ampere Rating (A): 40 A</li>
<li>Number of Poles (P): 3</li>
<li>Rated Operational Voltage (Ue) (V) AC: 415</li>
<li>Rated Insulational Voltage (Ui) (V) AC: 660</li>
<li>Frequency: 50 / 60Hz</li>
<li>Utilization Category: A</li>
<li>Standard Compliance: IEC 60947-2</li>
</ul>

Eps HM1-100C 3Pole 25KA Mccb 40A

eps hm1-100c 3pole 25ka mccb 40a molded case circuit breakers mccbs 3tiang eps/每股收益 3极25ka 每股收益

eps-hm1-100c-3pole-25ka-mccb-40a

<h3 class="md-block-header-three">Eps HM1-100C 3Pole 25KA Mccb 32A</h3> The EPS HM1 Series MCCBs are designed and fully type tested by Interlek SEMKO in compliance to IEC 60947-2 international standards. The complete range of this HM1 series MCCBs offers total protection against overcurrent and sort circuits at most common fault levels. The various interrupting capacities available under this series are most suitable for all installation ranging from Main Switchboard, Sub Boards to Distribution Boards. Product FeaturesMaterialThe casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation &amp; protection.MechanismThe EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.AccessoriesStandard features include a trip button and an automatic tripping device. In keeping up with the latest electrical designs and building automation, the HM1 series can be fitted with the following accessories.Electrical Features<ul class="md-block-unordered-list-item"><li>Frame Size: 100AF</li><li>Ampere Rating (A): 32 A</li><li>Number of Poles (P): 3</li><li>Rated Operational Voltage (Ue) (V) AC: 415</li><li>Rated Insulational Voltage (Ui) (V) AC: 660</li><li>Frequency: 50 / 60Hz</li><li>Utilization Category: A</li><li>Standard Compliance: IEC 60947-2</li></ul>

<h3>Eps HM1-100C 3Pole 25KA Mccb 32A</h3>
&nbsp;The EPS HM1 Series MCCBs are designed and fully type tested by Interlek SEMKO in compliance to IEC 60947-2 international standards. The complete range of this HM1 series MCCBs offers total protection against overcurrent and sort circuits at most common fault levels. The various interrupting capacities available under this series are most suitable for all installation ranging from Main Switchboard, Sub Boards to Distribution Boards.&nbsp;&nbsp;
Product Features
Material
The casing for the HM1 series MCCBs is made of BMC, a highly unbreakable material with a very strong dielectric strength to ensure the highest level of insulation &amp; protection.
Mechanism
The EPS HM1 series is designed to be trip-free and this occurs when the breaker contacts open under short circuit and overload conditions. To avoid single phasing, if a short circuit or overload occur on any one phase, a common trip mechanism will disconnect all phase contacts of a multi-pole breaker.
Accessories
Standard features include a trip button and an automatic tripping device. In keeping up with the latest electrical designs and building automation, the HM1 series can be fitted with the following accessories.
Electrical Features
<ul>
<li>Frame Size: 100AF</li>
<li>Ampere Rating (A): 32 A</li>
<li>Number of Poles (P): 3</li>
<li>Rated Operational Voltage (Ue) (V) AC: 415</li>
<li>Rated Insulational Voltage (Ui) (V) AC: 660</li>
<li>Frequency: 50 / 60Hz</li>
<li>Utilization Category: A</li>
<li>Standard Compliance: IEC 60947-2</li>
</ul>